Changing To Another Paper Size And Printing When Paper Runs Out - Sharp MX-2300G Printer Manual

CHANGING TO ANOTHER PAPER SIZE AND
PRINTING WHEN PAPER RUNS OUT
If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded
in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched
and paper is loaded in the machine. If you wish to print on paper in another tray because the desired size of paper is not
immediately available, follow the steps below.
1
Job Queue
Computer01
2
Print Job
Detail of
Computer01
Data : file-01.tiff
3
Colour / B/W: Full Colour
B5
Paper:
Plain
Paper Select
A4
4
B5
B4
A3
If you change to another paper size before printing, printing may not take place correctly; for example part of the text or
image may run off the paper.
JOB STATUS
Sets / Progress Status
1/1
020 / 001 Paper Empty
Scan to Fax Job
(1)
020/000 Paper Empty
Document 2-Sided
Style:
(Book)
Paper Select Output:
Special
Modes:
Plain A4
Plain
Plain
Plain
Plain
Press the [JOB STATUS] key.
Display details on the print job for which
Spool
Job Queue
there is no paper.
Complete
Detail
(1) Touch the key of the job for which "Paper
Priority
Empty" appeared.
Stop/Delete
Internet Fax (2) Touch the [Detail] key.
(2)
Touch the [Paper Select] key.
OK
Touch the key of the tray that has the
OK OK
paper you wish to use.
Printing begins.
57