Storing (Editing/Deleting) A Job Program - Sharp MX-2301N Operation Manual

STORING (EDITING/DELETING) A JOB PROGRAM

The procedures for storing copy settings in a job program and deleting a job program are explained below.
1
Job Programs
Press program number.
1
2
5
Recall
Job Programs
Press program number.
1
5
Recall
Editing or deleting a job program...
3
When a highlighted numeric key is touched, the following screen appears.
The [Store] key can be touched to delete the stored settings and store new settings. Go to the next step.
When the [Delete] key is touched, the stored settings are deleted. After the deletion is finished, touch the [Exit] key to
return to the base screen.
When "Disabling Deletion of Job Programs" is enabled in the system settings, a stored job program cannot be edited
or deleted.
Downloaded From ManualsPrinter.com Manuals
LOGOUT
2 3 4
6 7 8
Store/Delete
2 3 4
6 7 8
Store/Delete
Press the [#/P] key (
Touch the [Store/Delete] tab.
Exit
1/6
Touch a numeric key.
Exit
Numeric keys in which job programs are already stored are
1/6
highlighted.
• To store a job program, touch a numeric key that is not
highlighted.
• To edit or delete a job program, touch the key in which the
job program is stored (highlighted key).
A job program has been already stored
in this location.
Cancel Delete Store
2-139
COPIER
).
Contents