Sharp MX-2301N Operation Manual page 531

Scan
Special Modes
Job
Build
Original
Count
4
If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To
enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size Original]
key again.
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key (
• Once mixed size originals has been selected, an original scan size cannot be specified.
• Rotate cannot be used when Mixed Size Original is enabled.
To cancel the Mixed Size Original setting...
Touch the [Mixed Size Original] key in the screen of step 4 so that it is not highlighted.
System Settings (Administrator): Original Feeding Mode
The original feeding mode can be set to always scan mixed size originals.
Downloaded From ManualsPrinter.com Manuals
Mixed Size Slow Scan
Mode
Original
File Quick File
(2) (3)
) to cancel the operation.
Select the mixed size original setting.
OK
2/3
(1) Touch the
the screens.
(2) Touch the [Mixed Size Original] key so that
it is highlighted.
(1)
(3) Touch the [OK] key.
5-83
SCANNER/INTERNET FAX
keys to switch through
Contents