Automatic 2-Sided Copying Using The Document Glass - Sharp MX-2301N Operation Manual

AUTOMATIC 2-SIDED COPYING USING THE
DOCUMENT GLASS
1
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
2
Settings
Auto
Exposure
100%
Copy Ratio
Downloaded From ManualsPrinter.com Manuals
Originals
Automatic 2-sided copying of 1-sided
originals
Original size
detector
0
2-Sided Copy
Original A4
Output
Plain
A4
Special Modes
A4
1.
File
A4R
2.
B4
3.
A3 Quick File
4.
2-18
Copies
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
A5
(5-1/2" x 8-1/2")
B5
A4 (8-1/2" x 11")
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
• After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
Touch the [2-Sided Copy] key.
COPIER
Document glass scale
mark
B5R
A4R (8-1/2" x 11"R)
B4 (8-1/2" x 14")
A3 (11" x 17")
Contents