STAMPING SCANNED ORIGINALS (Verif. Stamp)
This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all
originals were correctly scanned.
Originals
• To use this function, the optional stamp unit must be installed.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Specify the destination.
☞
ENTERING DESTINATIONS
2
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
Select the special modes.
(1) Touch the [Mode Switch] key and select the desired mode.
3
(2) Touch the [Job Detail Settings] key.
(3) Touch the [Special Modes] key.
☞
SPECIAL MODES
Downloaded From ManualsPrinter.com Manuals
Position of stamp
(page 5-18)
(page 5-64)
Originals are
scanned
Insert the originals face up in the
document feeder tray.
5-88
SCANNER/INTERNET FAX
An "O" mark is
stamped
in fluorescent
pink.
Contents