Sharp MX-2301N Operation Manual page 226

4
If the displayed number of original sheets is different from the actual number of original sheets...
Press the [STOP] key (
To cancel the original count mode setting...
Touch the [Original Count] key in the screen of step 2 so that it is not highlighted.
Downloaded From ManualsPrinter.com Manuals
130 pages of original
have been scanned.
Copy the scanned data?
Cancel OK
).
After scanning is finished, check the
number of sheets that were scanned and
touch the [OK] key.
Copying will begin.
• When job build mode is used, the number of scanned sheets
appears when the [Read-End] key is touched.
• The number that is displayed is the number of scanned
original sheets, not the number of scanned original pages.
For example, when two-sided copying is performed using
one original, the number "1" will appear to indicate that one
original sheet was scanned, not "2" to indicate the front-side
page and the reverse side page.
2-124
COPIER
Contents