Output - Sharp MX-2301N Operation Manual

OUTPUT

To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions
that can be selected are sort, group, offset, staple sort, and punch. All explanations of the settings below assume that a
finisher is installed.
(1)
(1) [Group] key
This is used to group copies by page.
☞
Group mode
(2) [Staple Sort] key
This is used to sort output into sets, staple each set, and
deliver the sets to the tray. (Note that the sets will not be
offset in the output tray.) When this function is selected,
three keys will appear for selecting the staple position.
☞
Staple sort function
(3) [Sort] key
This is used to sort (collate) output into sets.
☞
Sort mode (page 2-35)
(4) Output display
An icon will appear to indicate the output mode.
(5) [Offset Tray] key ([Centre Tray] key*)
Output is delivered to the offset tray. The [Offset Tray]
key is automatically selected when the [Staple Sort] key
is selected.
* When a finisher is not installed, this key is the [Centre
Tray] key.
The above screen shows the keys that appear when a finisher is installed. The keys that appear will vary depending on what
peripheral devices are installed.
In addition, it may not be possible to select some keys depending what peripheral devices are installed. If your screen is
different from the screen of previous page, see the screens that follow.
Example
The screen when a finisher is not installed.
Downloaded From ManualsPrinter.com Manuals
(2) (3)
Output
Sort
Staple
Sort
Group
(page 2-35)
(page 2-36)
Output
(4) (5)
Offset
Tray
Offset
(8)
(6) [Right Tray] key
Select this key to have output delivered to the right tray.
When the right tray is selected, offset, staple sort, and
punch cannot be selected.
(7) [OK] key
Touch this key to close the output screen and return to
the base screen.
(8) [Offset] key
This is used to offset each set of output from the previous
set.
The offset function operates when the checkbox is
selected
not selected
cleared when the staple sort function is selected.)
☞
(9) [Punch] key
This is used to punch holes in the output.
☞
Centre
Right Tray
Tray
Sort
Group
Offset
2-34
(6)
(7)
OK
Right Tray
Punch
(9)
and does not operate when the checkbox is
. (The offset checkmark is automatically
Offset function (page 2-35)
Punch function (page 2-37)
OK
COPIER
Contents