Table of Contents
Advertisement
[6] ADJUSTMENTS
1. CHANGING THE PAPER SIZE
[Upper tray]
• A3 to A5R (11 x 7 to 5-1/2 x 8-1/2R) size plain paper can be set.
• Special paper can be set.
• Two maximum height lines are indicated: one for plain paper and one
for special paper.
Use the following procedure to change the size as needed.
1) Pull out paper tray.
If paper remains in the tray, remove it.
2) Adjust the guide plates A and B in the tray to the length and width of
the paper.
The guide plates A and B are slidable. Adjust them to the paper size
to be loaded while squeezing their lock levers.
3) Load paper into the tray.
Do not exceed red line when loading special paper to upper tray.
4) Gently push tray into the machine.
Push the tray firmly all the way into the machine.
5) Set the paper size.
Be sure to set the paper size and paper type referring to "2.Setting
the paper type and paper size".
If this is not done, paper misfeeds will occur.
2. SETTING THE PAPER TYPE AND
PAPER SIZE
Follow these steps to change the paper type setting if the paper type is
changed in either paper tray. For the paper types that can be used in
each tray.
1) Press the [CUSTOM SETTINGS] key.
The custom setting menu screen will appear.
2) Touch the [PAPER TRAY SETTINGS] key.
The paper tray selection screen will appear.
RINT
TA
ORWARD
PAPER TRAY
SETTINGS
PRINTER
CONDITION
3) Touch the [TRAY SETTINGS] key.
4) Display the setting screen of the desired paper tray.
CUSTOM SETTINGS
PAPER TRAY SETTINGS
TRAY 1
PRINT
COPY
Touch the
desired paper tray.
Note: To automatically switch to a tray with the same size and type of
paper (if there is one) in the event that the paper tray runs out of
paper, display the last screen with the
TRAY SWITCHING].
5) Touch the [TYPE/SIZE] key.
6) Select the type of paper that was loaded in the tray.
Example: The paper type of tray 2 is selected
CUSTOM SETTINGS
TRAY 2 TYPE/SIZE SETTING
SELECT THE PAPER TYPE.
PLAIN
PRE-PRINTED
RECYCLED
Touch the desired paper type to select it.
The paper size setting screen will appear.
AR-D29 ADJUSTMENTS
6 – 1
CUSTOM SETTINGS
PAPER TRAY SETTINGS
TRAY SETTINGS
TYPE / SIZE
FIXED PAPER SIDE
PLAIN / A4
DISABLE DUPLEX
DOC.
I-FAX
FAX
DISABLE STAPLE
FILING
DISABLE PUNCH
key or
key to display the setting screen of the
PER TRAY SETTINGS
TYPE / SIZE
TRAY 2
PLAIN / A4
DOC.
FAX
COPY
I-FAX
PRINT
FILING
LETTER HEAD
HEAVY PAPER
PRE-PUNCHED
LABELS
COLOUR
TRANSPARENCY
OK
1/4
key and select [AUTO
CANCEL
1/2
ENVELOPE
1/2
Advertisement
Table of Contents
