Sharp MX-2301N Operation Manual page 340

Fax
Mode Switch
Exposure
Job Detail
Settings
Standard
Resolution
Memory TX
Direct TX
Auto
Original
Auto Reception
Fax Memory:100%
Scan the original and send the fax.
If the original is placed on the document glass, follow these steps to start scanning and transmission:
When sending a fax normally (memory transmission)
(1) Press the [BLACK & WHITE START] key.
(2) When scanning is finished, replace the original with the next original.
(3) Press the [BLACK & WHITE START] key.
(4) Repeat steps (2) and (3) until all originals have been scanned.
(5) Touch the [Read-End] key.
When sending a fax in direct transmission mode
Multiple originals cannot be scanned in direct transmission mode.
Press the [BLACK & WHITE START] key to start transmission.
When transmission ends, image settings and convenient special mode settings are cleared.
To cancel scanning...
Press the [STOP] key (
System Settings (Administrator): Default Display Settings
The settings can be kept in effect a fixed period of time after scanning is completed.
Downloaded From ManualsPrinter.com Manuals
Special mode settings
Address Book
Auto
Sub Address
Special Modes
A4
Special Modes
Quick File
Begin transmission
).
Touch the [Job Detail Settings] key and then the [Special
Modes] key to select special modes such as timer
transmission and the erase function.
File
4-15
FACSIMILE
Contents