Adding Inserts When Copying On Transparency Film; Inserts - Sharp MX-2301N Operation Manual

ADDING INSERTS WHEN COPYING ON
TRANSPARENCY FILM
(Transparency Inserts)
When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts
function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the
sheets easy to handle.
It is also possible to copy on the inserts.
1
Place the original.
2
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Special Modes] key.
3
(3) Touch the
(4) Touch the [Transparency Inserts] key.
☞
Special modes menu (2nd screen)
Downloaded From ManualsPrinter.com Manuals
Oriented Oriented
horizontally
vertically
keys to switch through the screens.
(page 2-42)
2-69

Inserts

Place the transparency film in the
bypass tray.
• Transparency film can only be placed in the bypass tray.
• Place the transparency film face down on the bypass tray.
When placing the transparency film, the rounded corner of
the film should be:
- At the front and left if the film is oriented horizontally.
- At the back and left if the film is oriented vertically.
• After loading the transparency film, configure the bypass tray
settings as explained in
BYPASS TRAY" (page 2-38).
COPIER
"MAKING COPIES USING THE
Contents