Programming An F-Code Memory Box (Polling Memory) - Sharp MX-2301N Operation Manual

Programming an F-code Memory Box (Polling Memory)

Follow the steps below to program a memory box for F-code polling memory. The sub-address and passcode that you
program in the memory box are necessary for the other machine to poll your machine (request transmission) using
F-code communication.
• When programming a new memory box, a sub-address that is already programmed for another box cannot be used.
However, the same passcode can be used for more than one memory box.
• A total of 100 F-code memory boxes for all functions (polling memory, confidential, and relay broadcast) can be stored.
When 100 memory boxes are stored, no further memory boxes be stored. Delete unnecessary memory boxes and then
store a new memory box.
☞
Editing and Deleting F-code Memory Boxes
• A passcode does not need to be stored if the other machine does not use a passcode.
System Settings
Total Count
1
Paper Tray
Settings
Printer Condition
Settings
System Settings
Address Control
Direct Address / Program
2
System Settings
F-Code Memory Box
3 Store
Amend/Delete
F-Code Memory Box / Polling Memory
No.001
Box Name
Sub Address
4
Downloaded From ManualsPrinter.com Manuals
Admin Password
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
F-Code Memory Box
Custom Index
Polling Memory Confidential
Broadcast
Polling Memory Confidential
Broadcast
Next
(page 7-149)
Touch the [Address Control] key.
Exit
Touch the [F-Code Memory Box] key.
OK
Touch the [Polling Memory] key in the
OK
"Store" (upper) row of keys.
Relay
Relay
Enter a box name.
Exit
(1) Touch the [Box Name] key.
The box number (No.) that automatically appears is the
lowest number that has not yet been programmed.
(2) Enter a box name on the text entry screen
that will appear.
Enter up to 18 characters for the name.
7-141
SYSTEM SETTINGS
Contents