Using The Document Glass For Transmission - Sharp MX-2301N Operation Manual

USING THE DOCUMENT GLASS FOR
TRANSMISSION
To fax a thick original or other original that cannot be fed through the automatic document feeder, open the automatic
document feeder and place the original on the document glass.
1
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
• When faxing a multi-page original, scan each page in order starting from the first page.
• When sending a multi-page fax, the automatic document feeder and the document glass cannot both be used to
scan the original pages.
(2)
To
AAA AAA
CCC CCC
2 EEE EEE
Freq.
ABCD
In addition to specification by one-touch key, a destination can also be specified using a search number. You can also
directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
Press the [BLACK & WHITE START] key.
3
Scanning begins.
Downloaded From ManualsPrinter.com Manuals
Original size
detector
Cc
1/1
BBB BBB Address Review
DDD DDD
Sub Address
FFF FFF
OPQRST
EFGHI JKLMN UVWXYZ etc.
Sort Address
"ENTERING DESTINATIONS" (page 4-16).
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
A5
(5-1/2" x 8-1/2")
B5
A4 (8-1/2" x 11")
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
Condition
Settings
screen.
Global
(2) Touch the one-touch key of the desired
destination.
4-33
FACSIMILE
Document glass scale
mark
B5R
A4R (8-1/2" x 11"R)
B4 (8-1/2" x 14")
A3 (11" x 17")
Contents