Sharp MX-2301N Operation Manual page 502

Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can
be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8").
Select the mode and display the job detail settings screen.
(1) Touch the [Mode Switch] key and select the desired mode.
(2) Touch the [Job Detail Settings] key.
1
(3) Touch the [Original] key.
The automatically detected original size appears at the top of the [Original] key.
☞
JOB DETAIL SETTINGS
Scan
Scan Size
Original
Auto
2
2-Sided
Booklet
2-Sided
Tablet
Scan
Original
Auto
Manual
Manual
3
You can also touch the
Scan
Scan Size
Original
4
2-Sided
Booklet
2-Sided
Tablet
• When the scan size is specified by numerical values, the send size cannot be specified.
• When the automatic document feeder is used, an original longer than 432 mm (17") can be scanned (maximum width
1000 mm (39-3/8")). To scan a long original, touch the [Standard Size] tab in the screen of step 3 and then touch the [Long
Size] key.
☞
Specifying the original scan size (Specify using a standard size)
☞
TRANSMITTABLE ORIGINAL SIZES
Downloaded From ManualsPrinter.com Manuals
(page 5-50)
100%
Send Size
A4 Auto
Image Orientation
X
(25 432)
X 420
mm
Y
(25 297)
297
Y
mm
Size Input
Standard Size
(2), (3) (1)
keys to change the number.
Send Size
Auto
X420 Y297
Image Orientation
Touch the "Scan Size" key.
OK
Enter the scan size (original size).
OK
(1) Touch the [Size Input] tab.
(2) Touch the X (width) numeric value display
key and enter the width.
(3) Touch the Y (height) numeric value display
(4)
key and enter the height.
(4) Touch the [OK] key.
Touch the [OK] key.
OK
The specified size appears in the "Scan Size" key.
(page 5-53)
(page 5-17)
5-54
SCANNER/INTERNET FAX
Contents