Sharp MX-2301N Operation Manual page 165

Insertion Type A Setting
Print on Insert Sheets
Yes
(1)
4
If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied
on, tab paper can be inserted.
Special Modes
Covers/Inserts
Front Cover
5
Back Cover
Special Modes
Covers/Inserts
6
Front Cover
Back Cover
Downloaded From ManualsPrinter.com Manuals
Paper Tray
No 1-Sided 2-Sided
(2) (A) (B)
Cancel
Insertion
Type A Setting
Insertion
Settings
Insertion
Type B Setting
Cancel
Insertion
Type A Setting
Insertion
Settings
Insertion
Type B Setting
Select insert settings.
OK
(1) If the insert will be copied on, touch the
Bypass
[Yes] key. Otherwise, touch the [No] key.
Tray
A4
If the [No] key is touched, only insert sheet insertion will
Plain
be performed.
In this case, go to step (3).
(3) (4)
(2) To copy on one side of the insert, touch the
[1-Sided] key. To copy on both sides, touch
the [2-Sided] key.
(3) Select insert paper settings.
(A) The currently selected paper tray for the insert is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the inserts, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the desired paper tray in the tray
selection screen and touch the [OK] key.
Insertion Type A
(4) Touch the [OK] key.
If you wish to insert a different type of
OK
insert sheet, touch the [Insertion Type B]
OK
Paper Tray
key.
Settings
The screen of step 4 appears. Settings are selected in the
Page Layout
same way as for insert type A. Follow the procedures in step 4.
When following the procedures, substitute "Insert Type B" for
"Insert Type A".
Touch the [Insertion Settings] key.
OK
OK
Paper Tray
Settings
Page Layout
2-63
A4
A4 Plain
Plain
A4R Plain
B4 Plain
A3 Plain
Contents
COPIER
OK