The Stapling Position Or Punch Position Is Not Correct; Other Problems; Preview Images Or Thumbnail Images Do Not Appear; The Touch Panel Screen Is Difficult To View - Sharp MX-2301N Operation Manual

Problem
Punching does not
take place.
The stapling position
or punch position is
not correct.

OTHER PROBLEMS

Problem
Preview images or
thumbnail images do
not appear.
The touch panel
screen is difficult to
view.
You were logged out
without having
performed logout
yourself.
You forgot the
administrator
password.
Downloaded From ManualsPrinter.com Manuals
Point to check
Have functions been disabled by the
administrator?
Is the stapling position set correctly?
Are the punching positions set
correctly?
Point to check
Are there a number of jobs waiting to be
executed?
Is the display contrast properly
adjusted?
Did Auto Clear activate?
Was the administrator password
changed from the factory default
setting?
Some functions may have been disabled in the system
settings (administrator). Check with your administrator.
Check the stapling position setting.
☞
2. COPIER "OUTPUT" (page 2-34)
Check the punch position settings.
☞
2. COPIER "OUTPUT" (page 2-34)
Wait until several of the jobs have been executed.
Adjust the contrast using "Display Contrast" in the
system settings.
➞ System Settings > "Default Settings" > "Display
Contrast"
When user authentication is used, the currently logged
in user will be automatically logged out if Auto Clear
activates. (Except when in PC scan mode.)
Log in again.
If you are the administrator, you can change the time
setting of Auto Clear or disable Auto Clear in "Auto
Clear Setting".
➞ System Settings (Administrator) > "Operation
Settings" > "Auto Clear Setting"
Contact your dealer or nearest authorised service
representative.
For the factory default administrator password, see "TO
THE ADMINISTRATOR OF THE MACHINE" in the
Safety Guide. After changing the password, take special
care to remember it.
8-39
TROUBLESHOOTING
Solution
Solution
Contents