Automatically Scanning Both Sides Of An Original (2-Sided Original) - Sharp MX-2301N Operation Manual

AUTOMATICALLY SCANNING BOTH SIDES OF AN
ORIGINAL (2-Sided Original)
The automatic document feeder can be used to automatically scan both sides of an original.
Select the mode and display the job detail settings screen.
(1) Touch the [Mode Switch] key and select the desired mode.
1
(2) Touch the [Job Detail Settings] key.
(3) Touch the [Original] key.
☞
JOB DETAIL SETTINGS
Scan
Scan Size
Original
Auto
2-Sided
Booklet
2-Sided
Tablet
(1)
2
To cancel 2-sided scanning, touch the highlighted key so that it is no longer highlighted.
2-sided scanning automatically turns off after the transmission operation is completed.
Downloaded From ManualsPrinter.com Manuals
Scan transmission
2-sided original
(page 5-50)
100%
Send Size
A4 Auto
Image Orientation
(2)
Front and reverse sides are scanned
Specify the binding style of the 2-sided
OK
original (book or tablet) and the
orientation in which the original is placed.
(1) Touch the [2-Sided Booklet] key or the
[2-Sided Tablet] key.
(3)
A book and a tablet are bound as shown below.
Book
(2) Touch the appropriate "Image Orientation"
key.
If this setting is not correct, a suitable image may not be
transmitted.
(3) Touch the [OK] key.
5-51
SCANNER/INTERNET FAX
Tablet
A J
A B
E F
C
L
K L
Contents