Table of Contents
Advertisement
LUBRICATION SYSTEM
OIL JET
4-6
REMOVAL/INSPECTION
Separate
the
left and right crankcase
halves
(page
12-7).
'04:
Remove
the oil jet
from
the
left
crankcase.
Afler '04:
Remove the bolt and oil jet from the left
cra
nkcase.
Check the left crankcase oil passage for clogging.
Clean the oil passage.
Check the oi
l
jet for damage or clogging.
Blow open the oil passage in the oil jet with com-
pressed air.
INSTALLATION
'04:
ApplV locking agent to
the
oil jet threads and
tighten
it to the specified torque.
TOROUE:
2.0 N·m
(0.2
kgf·m, 1.4Ibf.ft)
After
'04:
Install the oil
jet
onto the left crankcase.
Apply locking agent to the oil jet mounting
bolt
threads and tighten it to the specified
torque.
TORQUE:
9.8 N'm (1.0
kgf·m,
7
Ibf.ft)
Assemble the left and
right
crankcase
(page
12-21).
'04:
After
'04:
'04:
(
'-1;a
OIL
J
ET
t
Advertisement
Table of Contents
Troubleshooting
