Honda 2004 CRF250X Service Manual page 144

COOLING SYSTEM
6-14
Install the water pump shaft into the right crankcase
cover.
Install the plain washer and impeller onto the water
pump shaft .
• The impeller has left hand threads.
Tighten the impeller to the specified torque.
TORQUE: 12 N'm (1.2 kgf·m , 9 Ibf.ft )
Install the right crankcase cover (page 10-6).
Install a new O-ring onto water pump cover.
Install the dowel pin.
Install the water pump cover and tighten the bolts.
Tighten the drain bolt with new sealing washer.
Connect the water hose and tighten the band screw.
Fill the system with the recommended coolant and
bleed the air (page 6-7).
PLAIN WASHERS
WATER PUMP SHAFT
RIGHT CRANKCASE COVER
IMPELLER
I