Shock Linkage Removal - Honda 2004 CRF250X Service Manual

Loosen the sub-frame upper mounting bolt and
install the air cleaner connecting bolt securely.
Install the sub-frame lower mounting bolts.
Tighten the sub-frame upper mounting bolt first,
then tighten the lower mounting bolts to the speci-
fied torque.
TORQUE:
Upper: 30 N·m (3. 1 kgf·m . 22lbf.ft)
lower: 49 N·m (5.0 kgf·m, 36 Ibf.ft)
Tighten the air cleaner connecting boot band screw
securely.
Install the fuel tank (page
2-7 ).
Install the seat (page 2-3).
SHOCK LINKAGE
REMOVAL
REAR WHEEL/SUSPENSION
Remove the mounting bolts and side stand assem- , - - - - - - - -- - - -- - - - - - ,
biV. SIDE STAND ASSEMBLY
Remove the nut and drive chain roller.
·04 ~
·06·
Remove the following:
- Shock absorber lower mounting bolVnut
- Shock arm bolt/nut/washer (shock link side)
- Shock arm bolt/nut/washer (swingarm side)
- Shock arm
- Shock link bolt/nut/washer (frame side)
- Shock link
--
LOWER
MOUNTING
BOLT/NUT
I
~HOCK
ARM
14-29