Honda 2004 CRF250X Service Manual page 347

For the rear brake, inst all the brake caliper guard
and tig hten the bolts securely.
Fill the reservoir w ith DOT 4 brake f luid to the top of
the upper level.
Install the diaphragm and reservoir cover.
Tighten the reservoir cover screws to the specified
torque.
TORQUE: 1.5 N·m (0.15 kgf·m , 1.1Ibf.ft)
Straighten the diaphragm and inst all it to the rear
mast er cylinder.
Check t he diaphragm installation as shown .
Install the set plat e and reservoir cover.
Tighten the reservoir cover bolts to the specified
torque.
TORQUE: 1.5 N·m (0.15 kgf·m , 1.1 Ibf·ft )
HYDRAULIC BRAKE
RESERVOIR CO'IiEFUDIAPf<R',GM
15-9