Fork Removal - Honda 2004 CRF250X Service Manual

FRONT WHEEl/SUSPENSION/STEERING
FORK
Do no! suspend the
brake caliper from
the brake hose.
Do
not twist the
brake hose.
13-12
With the front brake applied, pump the front sus·
pension up and down several t imes to seat the axle
and check the front brake operation.
Be sure the fork legs are paral lel, then tighten the
right axle holder bolts to the specified torque.
TORQUE: 20 N·m (2.0 kgf·m. 14 Ibf.ft)
Connect the tri p meter cable and tighten the lock nut
securely.
Install the brake disc cover and bolts.
Tighten the bolts to the specified torque.
TORQUE: 13 N'm (1,3 kgf·m, 9Ibf.ft)
REMOVAL
Remove the front wheel (page 13-7),
Remove the mounting bolts and front brake caliper.
Do not operate t he brake lever after removing the
caliper and front wheel. To do so w i ll cause diffi-
culty in fitting the brake disc between the brake pad.
Remove the bolts and brake hose clamp.
Remove the bolt and tripmeter cable clamp.
Remove the bolts and fork protect or.
BOLT/CLAMP
FORK PRClTEIOTO'R
BOLTS
CALIPER