Honda 2004 CRF250X Service Manual page 363

INSTALLATION
Connect the brake pedal to the push rod.
Install the joint pin and a new cotter pin.
Install the dust seals to the brake pedal.
Apply grease to the sliding surface of the brake
pedal and pivot bolt.
'04 - '06 only.
Clean and apply a locking agent to the threads of
the brake pedal.
Install the washer and pivot bolt.
Tighten the brake pedal pivot bolt to the specified
torque.
TORQUE:
'04 - '06: 25 N 'm 12.6 kgf·m. 19 Ibf.ft)
After '06: 36 N 'm (3.7 kgf·m , 27 IbUt)
Install the brake pedal clip securely.
Install the clip into the pivot bolt hole.
Install the return spring.
HYDRAULIC BRAKE
15-25