Standard Position - Honda 2004 CRF250X Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Pull up the outer tube slowly and install the fork
damper assembly into the outer tube.
INSTALLATION
Install the fork leg and tighten the bottom b ridge
pinch bolts to the specified torque.
TORQUE: 21 N 'm (2.1 kgf·m , 15 Ibf·ft )
Tighten the fork damper to the specified torque
using the special tool.
TOOL:
Lock nut wrench, 50 mm 07WMA-KZ30100
TORQUE: Actual : 34 N' m (3.5 kgf·m , 25 fbf·ftl
Indicat ed : 31 N 'm (3.2 kgf ·m , 23 Ibf.ft)
STANDARD POSITION
loosen the bottom bridge pinch bolts.
For ease when releasing the air pressure after the
forks are installed, position the fork outer tubes so
t he plug bolts are in front of the rebound adjusters.
Align the top surface of the top bridge with the
outer tu be upper surface as shown,
For changing position, see the Owner's Manual.
FORK DAMPER ASSEMBLY
OUTER TUBE - --"
13-29