CRANKCASE/CRANKSHAFT /TRANSMISSION/BALANCER
Apply oil to a new oil seal outer surface.
Install a new left crankshaft bearing oil seal
to
the
specified depth below the crankcase surface as
shown.
TRANSMISSION/BALANCER/SHIFT
DRUM BEARINGS
LEFT CRANKCASE
Remove the
counters
haft oi
l
sea!
and
balancer shaft
oil seal.
Remove the screws and countershaft beari ng set
plates.
Remove the snap ring from the left
crankcase.
SET PLATES
1.0
±
0.5
mm
(0.04
±
0.02
in)
OIL SEALS
12-15