Radiator Shroud Removal/Installation; Engine Guard Removal/Installation - Honda 2004 CRF250X Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
8e careful not
to Install the side cover by inserting the side cover tab
damage me tab.
into the air deaner housing.
Install the collar, side cover bolt and tighten the bolt
securely.
Install the collar ('04 - '06 only) and seat mounting
bolt.
Tighten the bolt to the specified torque.
TORQUE: 26 N'm (2.7 kgf·m , 20 Ibf·ft)
Left side only:
Close the left air cleaner housing cover.
RADIATOR SHROUD
REMOVAL/INSTALLATION
Remove the seat (page 2-3) ,
Note that the
Remove the bolts, collars and radiator shroud.
thinner collars are
with the upper
bolts.
Install the tab omo
Instal lation is in the reverse order of removal.
the sub-frame.
TORQUE:
Radiator shroud upper mounting bolt:
4.9 N 'm (0.5 kgf·m. 3.6 Ibf.ft)
ENGINE GUARD
REMOVALIINSTALLA TION
2-4
Remove the bolts/washers and engine guards.
Install the engine guard and tighten the bolt
securely.
SIDE COVER
BOLTI
-COLLAR