Front Wheel/Suspension/Steering Service Information - Honda 2004 CRF250X Service Manual

FRONT WHEEL/SUSPENSION/STEERING
SERVICE INFORMATION
GENERAL
• Keep grease off the brake pads and disc.
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with
a
high quality brake degreasing agent.
• When servicing the front wheel, fork or steering stem, support the motorcycle using a safety stand or hoist.
• After front wheel installation, check the brake operation by applying the brake lever.
• Refer to the brake system info rmation (page 15-3).
• When using the lock nut wrench, use a 20·inch long deflecting beam type torque wrench. The lock nut wrench increases
the torque wrench's leverage, so the torque wrench reading will be less than the torque actually applied to the fork
damper. The specification given on this page is actual torque applied to the fork damper, not the reading on the torque
wrench when used with the lock nut wrench. The procedure later in the text gives the actual and indicated torque.
SPECIFICATIONS
ITEM
98 kP, 1.0 I
- Wheel---;:r;::n-runout
RadTaT
-_ O
2
, . . . 20 :WaF,.0081
Ax;,1
~~ll~sp,;n~glh~ee,~"en~gth~}r~"0~5~ ~;"Oi)±~"0~~~~~!~iHi-~§
Tube ,unout - _1---""' 0 20" .008)
Recommended fork oil
Flu;d Foek tube
capacity
Foek
pOSition
'04. '05
, HP Fo,k 011 5W 0'
345 om' 11.7 US 0" 12.1 Imp 0'
10m'
11.3 US
0. 12.2 Imp o.
, om' US 0'. B.8 Imp 0')
onok, out hom ful ;
I
-
-
-
. ·OB 13 d;ok, out hom full ;n -
-
Afte"0 ~ B __ ~ 1~ 4 ~ ,d;ok ~ , ~ 0,uu~ttf ~ "'~0,cm ~ ' ~ fulll ~ ;n ________
L -____ _ - _ _
~
13-3