Honda 2004 CRF250X Service Manual page 286

FRONT WHEEL/SUSPENSION/STEERING
13-32
Remove the wire bands.
Remove the screws and engine start switch hous-
ing.
If you will nol disassemble the throttle housing,
remove the throttle housing as an assembly as fol-
lows.
Loosen the throttle housing bolts, turn the handle-
bar to the right fully, then remove the throWe hous-
ing.
If you will disassemble the throttle housing, remove
the dust cover and bolts.
Remove the throttle housing from handlebar.
Disconnect the throttle cables from the throttle pipe.
ENGINE START SWITCH HOUSING
•
THROTILE HOUSING
BOLTS
'04 - '06 shown:
TH"OTTLE HOUSING
DUST COVER