Honda 2004 CRF250X Service Manual page 119

'04 - '06 Install the clip to the jet needle groove.
STANDARD CLIP POSITION:
49 State and Canada type:
California type:
3rd position
2nd position
After ·06:
Install the jet needle, spring, spring seat to the nee-
dle holder.
Install the jet needle clip to the jet needle.
STANDARD CLIP POSITION:
49 State and Canada type:
California type:
no position
2nd position
·04 - '06:
Install the jet needle and jet needle holder into the
thronle valve.
Tighten the needle holder to the specified torque.
TORQUE: 2.0 N ·m (0.2 kgf·m, 1.4 Ibf·h)
After '06·
Install the jet needle/holder assembly into the throt·
tie valve.
Tighten the jet needlelholder assembly to the speci·
fied torque.
TORQUE: 2.0 N ·m (0.2 kgf·m , 1.4 Ibf·h)
Install a new O-ring and top cover.
FUEL SYSTEM
NEEDLE CUP
I
7
,
JET NEEDLE
NEEDLE HOLDER
SPRING SEAT
SPRING
~--
JET NEEDLE
COVER
5-23