Fork Disassembly - Honda 2004 CRF250X Service Manual

FRONT WHEEL/SUSPENSION/STEERING
8e careful nor to
scratch the slider
and nor co
damage
the dust seal.
13-14
DISASSEMBLY
Clean the fork assembly. the sliding surface of the , - -- -- - - - - - - - - - - - - - - ,
fork slider and the bottom of the slider around the
center bolt before disassembling the fork.
Measure the length between the axle holder and
outer tube, and record it before disassembling the
fork.
Hold the outer tube and remove the fork damper
from the outer tube using the special tool.
TOOL:
l ock nut w rench, 50 mm 07WMA-KZ30100
Slide the outer tube down onto the axle holder.
Drain the fork oil from the fork leg.
Drain the fork oil from the oil hole in the fork
damper.
Temporarily install the fork damper assembly into
the outer tube.
o
FORK DAI~PE,R
OUTER TUBE
OIL HOLE
FORK DAMPER ASSEMBLY
OUTER TUBE
-~
•
•
•
•
•