Honda 2004 CRF250X Service Manual page 117

Install the push rod while pushing the push rod link
lever.
Tight en the acc. pump bypass jet into the float
chamber.
TORQUE: 0.3 N 'm (0.03 kgf·m , 0.2 Ibf.ft)
Install a new O-ring to the float chamber.
Install the float chamber to the carburetor.
Install the hose guides and four float chamber
screws.
Tighten the screws to the specified t orque.
TORQUE: 2.0 N'm (0.2 kgf·m. 1.4Ibf.ft)
Install the throttle stop screw mount stay and
tighten the screw securely.
FUELSVSTEM
ACC. PUMP BYPASS JET
-.
FLOAT CHAMBER
SCREWS
MOUNT ST,W/:,CFIEW
5-21