Cylinder Head Installation - Honda 2004 CRF250X Service Manual

Install the insulator and tighten the screw.
Apply oil 10 a new O-ring and install it to the waler
hose pipe.
Inslallthe water hose pipe and tighten the bolt .
CYLINDER HEAD INSTALLATION
Install the dowel pins and a new gasket.
Apply oil to the cylinder head nul seating surface.
Install the cylinder head onto the cyli nder.
Be careful nOl T O let
Install the washers and cylinder head nuts.
the nu ts and
Tighten the nuts In a crisscross pattern in two or
washers fal/lnto
th ree steps to the specified torque.
the leh crankcase
TORQUE: 39 N'm (4.0 kgf·m, 29 Ibf·ftl
Install the cylinder head mounting bolts.
Tighten the cylinder mounting bolt and cylinder
head mounting bolts.
CYLINDER HEADIVALVES
INSULATOR
8-25