Honda 2004 CRF250X Service Manual page 276

FRONT WHEEl/SUSPENSION/STEERING
Extend the fork damper piston rod to its maximum
length .
Pour the recommended fork oil into the fork
damper.
RECOMMENDED FORK OIL:Pro-Honda HP Fork Oil
5W
or
equivalent
STANDARD CAPACITY:
192
em'
(6.5 US OZ, 6.8 Imp oz)
Pump the fork damper piston rod slowly several
times and bleed any air from the fork damper.
Extend the fork damper piston rod to its maximum
length.
Adjust the oi l level of the fork damper as shown .
OIL lEVEL: 42 -47
mm
(1,65 - 1.85
in)
88 careful not
fO Apply fork oil to the bush ing and new O-rings on the
damage the fork
fork cap assembly.
cap bushmg
Extend the fork damper piston rod to its maximum
length .
13-22
Hold the rod end, install the fork cap assembly into
the fork damper.
If it is difficult to install the fork cap assembly, the
fork damper oil level might be higher than standard.
Inspect the fork damper oil level again.
FORK DAMPER
FORK DAMPER
PISTON ROD
t
FORK DAMPER
-+-
OIL LEVEl
-
- - - - -
-----
---
fI
O-RINGS
FORK
DAI~P"R