Swingarm Disassembly - Honda 2004 CRF250X Service Manual

REAR WHEEL/SUSPENSION
Remove the swingarm pivot nut and washer.
Remove the swingarm pivot bolt and swingarm.
DISASSEMBLY
Check the chain slider for wear or damage.
Remove the screws, washer, collar and chain slider.
Remove the following:
- Side collars
- Dust seals
- Washers
- Thrust needle bearings
- Pivot collars
Check the dust seals and collars fo r wear, damage
or fatigue.
Check the needle bearings for damage or loose fit.
Check the thrust needle bea r ings for wear or dam-
age, replace if necessary.
-
D UST SEAL
Check the swingarm for cracks or damage. PIVOT COLLAR
Replace any damaged parts, if necessary. WASHERS
\
SIDE COLLAR
14-37