Radiator Removal - Honda 2004 CRF250X Service Manual

COOLING SYSTEM
Remove the radiator reserve tank cap and fill the
reserve tank to the upper level line.
Bleed air from the system as follow:
1. Shift the transmission into neutral. Start the
engine and let it idle for 2 - 3 minutes.
2. Snap the throttle three to four times to bleed air
from the system.
3. Stop the engine and add coolant up to proper
level if necessary. Reinstall the radiator cap.
4. Check the level of coolant in the reserve tank and
fill to the upper level line if it is low.
RADIATOR
REMOVAL
Drain the coolant (page 6-7),
Remove the radiator shrouds (page 2-4).
Remove the trim clips ('04 - '06 only) and radiator
grills.
Note the direction
Disconnect the following:
of the hose clamp.
Be careful nor to
damage the radialor
core.
6-8
- Coolant siphon hose
- Connecting hoses
- Upper and lower radiator hose
Remove the upper and lower mounting bolts.
Remove the radiator from the frame.
UPP~VEL
LINE'
•