Swingarm/Shock Linkage; Rear Suspension Inspection - Honda 2004 CRF250X Service Manual

MAINTENANCE
REAR SUSPENSION INSPECTION
Check the action of the shock absorber by com-
pressing it several times.
Lift the sub-frame (page 5-7),
Check the entire shock absorber assembly for signs
of leaks, damage or loose fasteners.
Replace damaged components which cannot be
repaired.
Tighten all nuts and bolts.
For shock absorber service (page 14-13).
SWINGARM/SHOCK LINKAGE
•
3-32
Raise the rear wheel off the ground by placing 8
workstand or equivalent under the engine.
Check for worn 5wingarm bearings by grabbing the
rear swing arm and attempting to move the
swingarm side-la-side.
Replace the bearings if excessively worn (page 14-35).
Check the shock linkage and replace any damaged
needle bearings.
Disassemble, clean, inspect the
5wingarm
and shock
linkage pivot bearings and related seals every three
races or about 7.5 hours of operation (page 14-29).
Lubricate and reassemble .