Fax Defaults - Fuji Xerox DocuCentre SC2020 User Manual

9 Tools
On

Fax Defaults

Purpose:
To modify the defaults for the [Fax] menu.
Note
Resolution
Purpose:
To specify the scan resolution to improve the output quality.
Values:
Standard
Fine
Super Fine
Photo
Note
2 Sided Scanning
Purpose:
To scan both sides of a sheet of paper.
1 Sided
9
2 Sided
* : This item is available only when [2 Sided Scanning] is set to [2 Sided Printing] in the [Scan Defaults] menu.
Lighten / Darken
Purpose:
To adjust the density to make the copy lighter or darker than the original.
Values:
Darken +3
Darken +2
Darken +1
Normal
Lighten +1
Lighten +2
Lighten +3
192
Creates a folder when saving a scanned image.
• The FAX service cannot be used unless you set up a region code under [Region].
• Bold values are the factory default menu settings.
Suitable for documents with normal sized characters.
Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Suitable for documents containing extremely fine detail. The
Super Fine mode is enabled only if the remote machine also
supports the Super Fine mode. See the notes below.
Suitable for documents containing photographic images.
• Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving
device.
Binding of Long Edge
* Binding
Original
Short Edge
Binding
Works well with light print or faint pencil markings.
Works well with standard typed or printed documents.
Works well with dark print.
Scans one side of a document.
Scans both sides of a document to be bound
by long edge.
Scans both sides of a document to be bound
by short edge.