Fuji Xerox DocuCentre SC2020 User Manual page 174

9 Tools
Off
On
Output Settings
Purpose:
To configure settings concerning output from the machine.
A4
8.5 x 11
* : The default for [Default Paper Size] varies depending on region-specific factory default.
Off
Top Left
Top Right
9
Bottom Left
Bottom Right
Note
Off
On
Note
174
Values:
60 sec
3-300 sec
Default Paper Size
Purpose:
To specify the default paper size.
Values:
*
*
Print ID
Purpose:
To specify a location where the user ID is printed.
Values:
• When you print on DL size paper, a part of the user ID may not be printed correctly.
Print Text
Purpose:
To specify whether the machine outputs PDL data, which is not supported by the
machine, as text when the machine receives it. Text data is printed on A4 or Letter size
paper.
Values:
Banner Sheet
• Banner Sheet feature is available only when the One Tray Module (optional) is installed on the
machine.
Purpose:
Disables the fault time-out.
Sets the amount of time the machine waits
before canceling a job that stops abnormally.
Does not print the user ID.
Prints the user ID on the top left of the page.
Prints the user ID on the top right of the page.
Prints the user ID on the bottom left of the page.
Prints the user ID on the bottom right of the page.
Does not print the received data.
Prints the received data as text data.