Control Panel - Fuji Xerox DocuCentre SC2020 User Manual

3 Product Overview

Control Panel

The names and functions of the control panel's components are described below.
3
No. Component
1 Touch Screen
2 Numeric keypad
3 <Redial/Pause> button
4 <Clear All> button
5 <Power Saver> button
6 <Stop> button
7 <Start> button
8 <Error> LED
9 <Data> LED
10 <C> (Clear) button
11 <Machine Status> button
12 <Job Status> button
13 <Services Home> button
52
Services Home
Job Status
Machine Status
13 12 11
Displays the operation menu items and the machine status messages.
Press these buttons to enter numbers (such as number of copies) or text.
Press this button to insert a pause between numbers when entering a
recipient's number.
Press this button to reset the displayed settings of each feature to default
values or clear the entered numbers. The setting is returned to the same
condition as the machine is powered on.
Lights up when the machine enters Power Saver mode to conserve power
when the machine is left idle for a while. You can also press this button to
enter or exit Power Saver mode.
Press this button to cancel a current job or failed job.
Press this button to start scanning documents or confirm the value of each
setting.
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs
with the machine, including paper jams and running out of paper.
Blinks when the machine is sending or receiving data to or from a client. This
indicator lights up when data is stored in the machine's memory or when
the machine receives faxes waiting to be printed.
Press this button to delete one numerical value that you have entered.
Press this button to print reports and check the machine information such as
the status of consumables and the machine's IP address.
Press this button to check/cancel a current job or pending job.
Press this button to display the Services Home screen.
1 2
Redial/Pause
10
Function
3 4 5 6
Power Saver
Clear All Stop
Start
Error
Data
9 8 7