Fuji Xerox DocuCentre SC2020 User Manual page 240

12 Maintenance
Checking the Machine Status with E-mail
This section describes cautions when sending e-mail to the machine to check the machine
status.
12
Commands That Can Be Used in E-mail Text
Use each command according to the following rules:
240
Item
Protocol Settings > Machine's E-mail
E-mail Address,
SMTP Server Address,
SMTP Server Port
Number,
E-Mail Send
Authentication,
Login Name,
Password,
SMTP Server
Connection Status,
POP3 Server Address,
POP3 Server Port
Number,
Login Name,
Password,
POP3 Server Check
Interval,
APOP Settings,
POP3 Server Connection
Status
Permitted E-mail
Address
StatusMessenger
Password
You can specify any title for the e-mail when checking the machine status or changing the
machine settings.
Use the commands described in the next section to create the text of the e-mail.
Prefix all commands with "#", and specify the #Password command at the top of the e-
mail.
Command lines without "#" are ignored.
Write one command on each line and separate each command and parameter with a
space or a tab.
Item to be
configured
Select appropriate settings for sending and
receiving e-mail.
When setting the permission for checking
information and changing the settings for an e-
mail address, enter the e-mail address that is
permitted to receive the e-mail. If no address is
entered here, the machine receives e-mails from
all users.
When setting the password for access to the
machine (both read only and read/write), enter
the password in the [Password] field.
Description