Sending The Scanned File On The Network - Fuji Xerox DocuCentre SC2020 User Manual

3 Computer Settings
wizard
4 Server Name / IP
Address
5 Share Name
6 Path
7 Login Name
8 Login Password
9 Confirm Login
Password
10 Port Number
After you configured settings, go to "Sending the Scanned File on the Network" (P.137).

Sending the Scanned File on the Network

1
Place document in the machine.
2
Press the <Services Home> button.
Clicking this button opens the wizard screen which guides you
through several steps.
When you complete the steps in the wizard, the settings for [Server
Address] are automatically configured.
Enter a server name or IP address of your computer or the FTP server
that you have shared out.
The following are examples:
For [Computer (SMB)]:
Server name: myhost
IP address: 192.168.1.100
For [Server (FTP)]:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
Enter the name of the shared folder on the recipient computer. For
SMB only.
For [Computer (SMB)]
To store the scanned document in the shared folder directly without
creating any subfolder, leave the space blank.
To store the scanned document in the folder you created under the
shared folder, enter the path as following.
Example: Share Folder name: "MyShare", Second-level folder name:
"MyPic", Third-level folder name: "John"
You should now see "MyShare\MyPic\John" in your directory.
MyShare (Share folder)
MyPic
John
In this case, enter the following item.
Path: \MyPic\John
For [Server (FTP)]
Enter the path to store the scanned document.
Enter the user account name that has access to the shared folder on
your computer or FTP server.
Enter the password corresponding to the above login name.
Note • Empty password is not valid in the Scan to Computer feature.
Ensure that you have a valid password for the user login account.
(Refer to "Setting a Login Name and a Password (SMB Only)"
(P.131) for details on how to add a password in your user login
account).
Re-enter your password.
Enter the port number. If you are unsure, you can enter the default
value of 139 for SMB and 21 for FTP.
Using a Scanner on the Network
7
137