Network Setup - Fuji Xerox DocuCentre SC2020 User Manual

On

Network Setup

Use the [Network Setup] menu to change the machine settings affecting jobs sent to the
machine through the network.
Note
Ethernet
Purpose:
To confirm or specify network settings.
IP Mode
Purpose:
To configure the IP mode.
Values:
Dual Stack
IPv4 Mode
IPv6 Mode
TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
Get IP Address
IP Address
Subnet Mask
Enables the Ignore Form Feed feature.
• Bold values are the factory default menu settings.
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Uses IPv6 to set the IP address.
DHCP / AutoIP
BOOTP
RARP
DHCP
Panel
Understanding the Machine Menus
Sets the IP address automatically. A random
value in the range of "169.254.1.0" to
"169.254.254.255" that is not currently in use
on the network is set as the IP address. The
subnet mask is set as "255.255.0.0".
Sets the IP address using BOOTP.
Sets the IP address using RARP.
Sets the IP address using DHCP.
Use this option when you want to set the IP
address manually on the control panel.
When an IP address is being set manually, the
IP is allocated to the machine using the
format "nnn.nnn.nnn.nnn". Each octet that
makes up "nnn.nnn.nnn.nnn" is a value in the
range of "0" to "254. 127" and any value in
the range of "224" to "254" cannot be
specified for the first octet of a gateway
address.
When an IP address is being set manually, the
subnet mask is specified using the format
"nnn.nnn.nnn.nnn". Each octet that makes up
"nnn.nnn.nnn.nnn" is a value in the range of
"0" to "255.255.255.255.255" cannot be
specified as the subnet mask.
9
157