Scanning From Control Panel (Wsd Scan); Scanning To A Computer; Scanning From The Control Panel - Wsd Scan - Fuji Xerox DocuCentre SC2020 User Manual

7 Scan

Scanning to a Computer

This section describes how to scan document to a computer.

Scanning From the Control Panel - WSD Scan

If the machine is connected to a computer via network using WSD (Web Services on
Devices), you can use the WSD Scan function to send scanned images to a computer.
The following procedure uses Windows 7 as an example.
Note
Printer Setup for WSD Scan
Setup the machine and computer for connection using WSD.
Checking the Printer Setting
To use the WSD Scan function, [WSD Scan] needs to be set to [Enable]. For more
information, refer to "Protocols" (P.158).
Setting Up the Computer
Note
7
1
Click [Start] > [Computer] > [Network].
2
Right-click the icon for the machine, and then click [Install].
The machine is connected using WSD.
1
Click [Start] > [Network].
2
Right-click the icon for the machine, and then click [Install].
3
Click [Continue].
The machine is connected using WSD.
Procedures for WSD Scan
1
Place document in the machine.
2
Press the <Services Home> button.
3
Select [Scan to].
4
Select [WSD].
5
Select [
select that computer.
6
Select [Event], and specify the type of scan such as [Scan] and [Scan To E-mail].
7
Press the <Start> button to begin sending the scanned file.
126
• To use WSD Scan, you need to setup connection using WSD.
*
• WSD is supported only on Windows Vista
* : WSD stands for Web Services on Devices.
• For Windows 8, the computer automatically connects the machine using WSD. There is no need to
install the machine manually.
For Windows 7:
For Windows Vista:
] until the desired computer you want to send the scan job to appears, and then
®
, Windows 7, and Windows 8.