Fuji Xerox DocuCentre SC2020 User Manual page 93

Follow the steps below to place document in the document feeder.
You can place a single or multiple pages of a document.
1
Remove any paper clips or staples from document before placing it in the document
feeder.
2
Place the document in the center of the
document feeder, with the side to be scanned (or
the front surface of a 2 Sided document) facing
up.
3
Align the document guides to each side of
document.
4
Open the document stopper.
Document Glass
Document sizes supporting automatic detection
The document size is detected automatically when [Original Size] is set to [Auto].
The following document sizes are detected automatically: A3
B5 , A5
Supported document sizes
You can select one of the following document sizes from [Original Size].
A3 , B4
Important • The paper size for fax transmissions is different from the document sizes supporting automatic
CAUTION
Do not apply excessive force to hold thick document on the document glass. It may
break the glass and cause injuries.
, 11 × 17" , 8.5 × 11" , 8K
, A4 , B5 , A5 , 8K
detection. For more information, refer to "Original Size" (P.101).
, 16K , and 16K .
, 11 × 17" , 8.5 × 14"
Overview of Fax Operations
, B4 , A4 , A4 , B5 ,
,8.5 × 13" , and 8.5 × 11
6
.
93