Fuji Xerox DocuCentre SC2020 User Manual page 257

Symptom
The copy is not The document glass cover or
the desired size. document glass is dirty.
The document is a
transparency or highly
translucent medium.
The document has shifted out
of position.
The document feeder's
document guides are
misaligned.
The document is creased.
The edges of The document exceeds the
copies are cut off. printable area.
Possible Cause
Clean the document glass cover or document
glass.
Refer to "Cleaning the Document Glass Cover and the
Document Glass" (P.237).
Place a sheet of white paper over the
document before copying.
Refer to "Placing Document" (P.72).
Place the document correctly.
Refer to "Placing Document" (P.72).
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Refer to "Placing Document" (P.72).
Smooth out the document and place it again
correctly.
Refer to "Placing Document" (P.72).
Adjust the reduction/enlargement factor to
reduce the copy slightly.
Copying Problems
Remedy
257
13