Fuji Xerox DocuCentre SC2020 User Manual page 162

9 Tools
Pattern1-7
9
Lower
Normal
Higher
Incoming Defaults
Purpose:
To configure settings for incoming fax.
162
Values:
Extel Hook Threshold
Purpose:
To select the external telephone hook detection threshold for the condition in which a
telephone line is not being used.
Values:
Receive Mode
Purpose:
To select the default fax receiving mode.
DRPD is a service provided by some telephone companies.
DRPD patterns are specified by your telephone company. The
patterns provided with the machine are shown below:
Pattern1
Pattern2
Pattern3
Pattern4
Pattern5
Pattern6
Pattern7
Ask your telephone company which pattern you need to select
to use this service. For example, Pattern7 is the New Zealand
FaxAbility distinctive ringing pattern: rings for 400 ms, stops
for 800 ms, rings for 400 ms and stops for 1400 ms. This
pattern is repeated over and over again. This machine only
responds to Distinctive Alert cadence(s) DA4 in New Zealand.
Sets the external telephone hook detection threshold to Lower.
Sets the external telephone hook detection threshold to Normal.
Sets the external telephone hook detection threshold to Higher.