Setting The Network Environment; Setting The Machine's Ip Address (Ipv4) - Fuji Xerox DocuCentre SC2020 User Manual

2 Environment Settings

Setting the Network Environment

This section describes how to make the settings needed to use the TCP/IP protocol.
Note

Setting the Machine's IP Address (IPv4)

To use the TCP/IP protocol, you must set the machine's IP address.
By default, the machine is set to obtain its IP address automatically.
This setting automatically sets the machine's IP address when the machine is connected to
a network containing a DHCP server.
Print the System Settings Report to check whether the machine's IP address has already
been set.
2
You can also check the IP address in the following methods:
For information on how to print the System Settings Report, refer to "Printing Reports/Lists" (P.218).
For information on the message field of the touch screen, refer to "Touch Screen - Services Home Screen" (P.53).
For information on how to check on the [About This MFP] screen, refer to "Checking the Machine's IP Address" (P.216).
For information on how to check using CentreWare Internet Services, refer to the online Help of CentreWare Internet
Services.
34
• The machine supports IPv6 addresses in an IPv6 network environment. For more information, refer
to "Setting the Machine's IP Address (IPv6)" (P.35).
On the message field of the touch screen
On the [About This MFP] screen
Using CentreWare Internet Services