Scan Defaults - Fuji Xerox DocuCentre SC2020 User Manual

1 2 Sided
2 1 Sided
2 2 Sided
Pages Per Side
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off
2-Up
Edge Erase
Purpose:
To specify the value of the top and bottom margins.
Values:
Top / Bottom
Left / Right
Middle

Scan Defaults

To modify the defaults for the [Scan] menu and [Email] menu defaults.
Note
File Format
Purpose:
To specify the file format to save the scanned image.
-
Binding of Long Edge
Output Binding
Short Edge
Binding
-
Binding of Long Edge
Original Binding
Short Edge
Binding
-
Binding of Long Edge
Original Binding
Short Edge
Binding
Does not perform Pages Per Side printing.
Automatically reduces the original pages to fit onto one sheet of
paper.
0.2 inch (4 mm)
0.0-2.0 inch (0-50 mm)
0.2 inch (4 mm)
0.0-2.0 inch (0-50 mm)
0.0 inch (0 mm)
0.0-2.0 inch (0-50 mm)
• Bold values are the factory default menu settings.
Understanding the Machine Menus
Prints one sided originals on both sides of a
sheet of paper.
Prints on both sides of a sheet of paper to be
bound by long edge.
Prints on both sides of a sheet of paper to be
bound by short edge.
Prints two sided originals on one side of a
sheet of paper.
Prints on both sides of a sheet of paper to be
bound by long edge.
Prints on both sides of a sheet of paper to be
bound by short edge.
Prints two sided originals on both sides of a
sheet of paper.
Prints on both sides of a sheet of paper to be
bound by long edge.
Prints on both sides of a sheet of paper to be
bound by short edge.
Sets the value in increments of 0.1 inch (1 mm).
Sets the value in increments of 0.1 inch (1 mm).
Sets the value in increments of 0.1 inch (1 mm).
9
187