Fuji Xerox DocuCentre SC2020 User Manual page 241

When the same command is written two or more times in one e-mail, the second and
subsequent commands are ignored.
Command
#Password Password
#NetworkInfo
#Status
Example of Commands
When the read only password is "ronly", and to check the machine status:
#Password ronly
#Status
#NetworkInfo
Parameter
Use this command at the top of the e-mail when
a password for read only is set. You can omit this
command when the password is not set.
- Set this when you want to check information on
the network settings list.
- Set this when you want to check the machine
status.
Managing the Machine
Description
12
241