Interface Cables; Using The Usb Interface; Using The Ethernet Interface - Fuji Xerox DocuCentre SC2020 User Manual

2 Environment Settings

Interface Cables

When connecting the machine directly to a computer, use a USB interface. When
connecting the machine to a network, use an Ethernet interface.

Using the USB Interface

The machine supports the USB 2.0 interface.
To connect the USB interface:
1
Press the power switch to the [ ] position to turn
the power OFF.
Note
2
2
Connect a USB cable to the USB port.
3
Connect the other end of the USB cable to the computer.
4
Press the power switch to the [ | ] position to turn
the power ON.

Using the Ethernet Interface

The machine supports 100BASE-TX and 10BASE-T Ethernet interfaces.
To connect the Ethernet interface:
32
• Make sure that the display is turned off.