Fuji Xerox DocuCentre SC2020 User Manual page 256

13 Problem Solving
13
256
Symptom
Copies are too The copy density adjustment
dark or too light. is not right.
The document is light.
The image quality setting is
not correct for the document.
The copy is The paper loaded in the tray
slightly out of is misaligned.
position.
Copies have The paper is damp.
missing parts in
them.
The paper in the tray is
creased or wrinkled.
The document has been cut-
and-pasted, or is creased.
Striped patterns The document's enlargement
appear in copies. factor is too large.
Copies are out of You have not placed the
position or document correctly.
crooked
The document feeder's
document guides are
misaligned.
You have not mounted the
tray securely.
The paper guides of Tray 5
(bypass) are misaligned.
The document size is not
correct.
The paper size is not correct.
Possible Cause
Adjust the copy density.
Refer to "Lighten / Darken" (P.84).
Adjust the copy density.
Refer to "Lighten / Darken" (P.84).
If the copy output of black text is too light,
set [Original Type] to [Text].
Refer to "Original Type" (P.85).
Align the paper stack, and load it so that the
leading edge of the paper is aligned with the
front corners of the tray.
Damp paper creates missing parts or unclear
copies. Replace it with paper from an
unopened pack.
Remove any problematic sheets, or replace
the paper with paper from an unopened
pack.
Cut-and-pasted or creased parts of the
document may not be making proper contact
with the document glass. Place a stack of
white paper on top of the document to bring
it into proper contact with the document
glass.
When making enlarged copies, some
enlargement factors can create striped
patterns. Adjust the copy enlargement factor.
Refer to "Reduce / Enlarge" (P.82).
Place the document correctly.
Refer to "Placing Document" (P.72).
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Mount the tray by inserting it securely all the
way into the machine.
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Check the document size set correctly.
Refer to "Original Size" (P.88).
Check the paper size set correctly.
Refer to "Changing the Paper Settings" (P.69).
Remedy